 |
|
|
 |
 |
|
| Adhesives at Work Delta Adhesives are premium quality products manufactured to the highest quality standards from the finest materials available using state of the art technology. |
 |
They provide designers/engineers with rapid solutions to bonding, sealing, locking and joining problems. Adhesives improve performance by reducing production costs, speed up assembly lines and maintainence repairs.
Thread Locking-Anaerobic Adhesives
 |
D66 Stud Grade |
|
|
D77 Nut Grade Use where disassembly is required. Locks nuts, bolts, screws and studs. Prevents fasteners working loose from vibration and shock. Temp range -60°C to +150°C. |
|
|
D44 Screw Grade Low strength locking of fasteners, can be re-adjusted. Use on electronic assemblies, precision screws and instruments. Temp range -60°C to +150°C. |
|
|
D33 Penetrating Grade Capillary action grade can be applied to assembled parts ie. threaded fasteners, close fitting parts, seals porous castings, instrument assembly. Can be disassembled. Temp range -60°C to +150°C |
Sealing-Anaerobic Adhesives
 |
D333 Pipe
Sealant Grade |
|
|
D444 Multi Gasket Eliminates need for pre-cut gaskets. Use on face to face joints, flanges, engine assembly, gear box and axle casings. Temp range -60°C to +150°C. |
|
|
D555 Flex Gasket High performance gasket. Use on rigid and flexible assemblies. High pressure sealing on face to face joints flanges, engine covers, pump faces, motors, compressors etc. Temp range -60°C to +180°C. |
|
|
D888 Hydraulic Grade Sealing of hydraulic connections, pneumatic fittings, ideal for sealing unions and olives on diesel fuel lines. Will not clog filters or valves. Temp range -60°C to +150°C. |
Retaining-Anaerobic Adhesives
|
|
D22 Bearing Grade Retaining of bearings, cylindrical parts, bushes and oil seals that require disassembly. Parts can be dismantled with normal hand tools. Temp range -60°C to +150°C. |
|
|
D55 High Strength Retainer For permanent retention of cylindrical parts where maximum retention is required, splines, bushes, keys, rotors to shafts, pulleys and sprockets. High viscosity, gap filler. Temp range -60°C to +150°C. |
|
|
D88 Retaining Grade - High Temp High Temperature retaining grade permanent retention. Gears, pulleys, fans, couplings, oilite bushes, cams and rotors. Temp range -60°C to +200°C. |
Bonding-Cyanoacrylate Adhesives
 |
CYNO 40 A fast curing low viscosity cyanoacrylate suitable for rubber, ceramics, plastics, metals, "O" rings and UPVC. Colour: Clear Viscosity: Low Gap FIll: 0.10mm Shear: 30N/mm² Set TIme: 2-30 secs Equivalent: 406/495 |
 |
CYNO 110 A fast curing medium viscosity cyanoacrylate suitable for rubber, EPDM, SBR, PVC, metals and pottery. A general purpose cyanoacrylate. Colour: Clear Viscosity: Medium Gap FIll: 0.10mm Shear: 30N/mm² Set TIme: 2-45 secs Equivalent: 401 |
 |
CYNO 1200 High viscosity cyanoacrylate use where vibration occurs, on uneven surfaces, metals, plastics, ferrite magnets, rubber and ceramics. High gap fill. Colour: Clear Viscosity: High Gap FIll: 0.20mm Shear: 30N/mm² Set TIme: 5-60 secs Equivalent: 415 |
 |
CYNO 2000 Tough black cyanoacrylate use where high shock resistance and flexing is required. Use on rubber, plastics, shoe repairs, metals, wire tacking, loud speakers and rubber to metal applications. Colour: Black Viscosity: High Gap FIll: 0.30mm Shear: 17N/mm² Set TIme: 30-50 secs Equivalent: 480 |
 |
CYNO GEL |
 |
D412 CYNO-DE-BONDER USES PACKAGING |
Sealants / Gasketing
 |
D200 Colour: Clear QTY: 310ml Description: Delta silicone rubber sealants are one part moisure cure (R.T.V.). They are 100% silicone, will not shrink and remain flexible after cure, suitable for use on most substrates. Excellent weather resistance. Acetic acid fumes evolve during cure. (Do not use on copper or lead). Application: Ensure surfaces are clean before applying sealant, use as a gasket bonding agent on metals, plastics, glass, wood, concrete, plasterboard, acrylics, etc. A highly versatile product use in the engineering, marine, construction and automotive industries. Temp: -60°C to +260°C |
 |
D201 Colour: White QTY: 310ml Description: Delta silicone rubber sealants are one part moisure cure (R.T.V.). They are 100% silicone, will not shrink and remain flexible after cure, suitable for use on most substrates. Excellent weather resistance. Acetic acid fumes evolve during cure.(Do not use on copper or lead). Application: Ensure surfaces are clean before applying sealant, use as a gasket bonding agent on metals, plastics, glass, wood, concrete, plasterboard, acrylics, etc. A highly versatile product use in the engineering, marine, construction and automotive industries. Temp: -60°C to +260°C |
 |
D202 Colour: Black QTY: 310ml Description: Delta silicone rubber sealants are one part moisure cure (R.T.V.). They are 100% silicone, will not shrink and remain flexible after cure, suitable for use on most substrates. Excellent weather resistance. Acetic acid fumes evolve during cure. (Do not use on copper or lead). Application: Ensure surfaces are clean before applying sealant, use as a gasket bonding agent on metals, plastics, glass, wood, concrete, plasterboard, acrylics, etc. A highly versatile product use in the engineering, marine, construction and automotive industries. Temp: -60°C to +260°C |
 |
D203 Colour: Clear QTY: 85g Description: DELTA instant gasket (RTV cure) A specially formulated premium silicone to replace pre-formed gaskets. It forms a flexible rubber seal and is resistant to oils, water and antifreeze. (Not suitable for immersion in petrol). Application: Ensure surfaces are clean, suitable for, engine casings, flanges, transmissions, used widely in engineering, marine and automotive industries. Temp: -60°C to +260°C |
 |
D204 APPLICATION GUN FOR 310ml CARTRIDGES |
 |
D205 Colour: Black QTY: 310ml Description: DELTA Polyurethane sealant adhesive (RTV cure) is a very high quality product, minimum shrink and has a very high degree of flexibility it remains permanently elastic after cure, has very good adhesion to many substances and excellent resistance for use where vibration occurs.Weather proof and resists many chemicals. Application: Ensure surfaces are clean before application, will seal and bond steel, aluminium, stainless steel, wood, concrete, plastics, fibreboard, fibreglass etc. used in engineering, auto, marine, electrical and construction industries. Can be overpainted when cured. Temp: -30°C to +90°C |
 |
D206 |
 |
D207 Colour: White QTY: 310ml Description: DELTA Polyurethane sealant adhesive (RTV cure) is a very high quality product, minimum shrink and has a very high degree of flexibility it remains permanently elastic after cure, has very good adhesion to many substances and excellent resistance for use where vibration occurs. Weather proof and resists many chemicals. Application: Ensure surfaces are clean before application, will seal and bond steel, aluminium, stainless steel, wood, concrete, plastics, fibreboard, fibreglass etc. used in engineering, auto, marine, electrical and construction industries. Can be overpainted when cured. Temp: -30°C to +90°C |
 |
D208
|
 |
D209
|
Epoxy Resin Structural Adhesives
|
|
D300 Description: Rapid Cure Epoxy: Two Part Twin Syringe. QTY: 28ml Cure Time: 5 mins Colour when cured Amber Basic Usage: General Purpose. Will Bond, Wood, Concrete, Tiles, Metals etc. Application: Cut end off dispensing nozzles squeeze out required amount mix together untill even colour, apply to prepared surface, when finished seal end of nozzles with end cap provided. |
|
|
D301 Description: Rapid Cure Epoxy: Two Part Twin Syringe. QTY: 28ml Cure Time: 10-15 mins Colour when cured Steel Grey Basic Usage: Steel Epoxy Substitute. Will Bond and Repair Steel Castings, Broken Flanges, Valves, Key Ways and Cast Iron Components. Application: Cut end off dispensing nozzles squeeze out required amount mix together until even colour, apply to prepared surface, when finished seal end of nozzles with end cap. Smooth down with damp cloth for smooth finish. |
|
|
D303 Description: Quick Steel Epoxy: Two Part Paste. 2-1 Mix Ratio. Bulk Pack. QTY: 500g Cure Time: 4 hours Colour when cured Steel Grey Basic Usage: Steel Epoxy Substitute. Will Bond and Repair Steel Castings, Broken Flanges, Valves, Key Ways and Cast Iron Components. For larger usage, slow cure. Application: Use two parts base to one part activator, mix together until even colour then apply to prepared surface. Smooth down with water and spatula for smooth finish. |
|
|
D304 Description: Steel Stick Epoxy: Two Part in Putty Form. QTY: 125g Cure Time: 30 mins Colour when cured Steel Grey Basic Usage: Steel Epoxy Substitute. Will Bond and Repair Steel Castings, Broken Flanges, Valves, Key Ways and Cast Iron Components. Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish. |
|
|
D305 Description: Aqua Stick Epoxy: Two Part in Putty Form. QTY: 125g Cure Time: 45 mins Colour when cured White Basic Usage: Aqua Stick will cure under water, Bonds and Repairs Fibreglass, Metals, Ceramics, Wood, Concrete, Pipes, Valves etc. Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish. |
|
|
D306 Description: Plastic Stick Epoxy: Two Part in Putty Form. QTY: 125g Cure Time: 2-3 hours Colour when cured White Basic Usage: Plastic Stick Bonds to PVC, CPVC, ABS, Gutters, Drain Pipes, Automotive Repairs and Domestic Appliances. (Not suitable for Polyolefins) Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish. |
|
|
D307 Description: Copper Stick Epoxy: Two Part in Putty Form. QTY: 125g Cure Time: 30 mins Colour when cured Copper Basic Usage: Copper Epoxy Stick used to repair Pipes, Elbows, Sink Taps, Water Heaters. Will seal freeze breaks in pipework. Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish. |
|
|
D308 Description: Wood Stick Epoxy: Two Part in Putty Form. QTY: 125g Cure Time: 45 mins Colour when cured Wood Basic Usage: Moulds to repair or restore Wooden Objects, Carvings, Frames, Mouldings and fills holes. Furniture repair. Application: Break off required amount knead together until even colour. Apply to prepared surface. Smooth down with water and spatula for smooth finish. |
|
|
D309 Description: Aluminium Epoxy Paste: Two Part Paste. 2-1 Mix Ratio. Bulk Pack. QTY: 500g Cure Time: 4-5 hours Colour when cured Aluminium Basic Usage: Aluminium Epoxy Substitute will bond and repair Aluminium Castings, Aluminium Tanks, Pipework etc. Application: Use two parts base to one part activator, mix together until even colour then apply to prepared surface. Smooth down with water and spatula for smooth finish. |
|
D310 Description: Epoxy Cartridge Fast Cure QTY: 50ml Cure Time: 5 mins cure Basic Usage: Two part, bonds glass, ceramics, metals, hard plastics and optical fibres. Application: Easily dispensed with application gun and mixing nozzle ideal for assembly work. |
|
D311 Description: Epoxy Cartridge Slow Cure QTY: 50ml Cure Time: 30 min cure Basic Usage: Two part, bonds glass, ceramics, metals, hard plastics and optical fibres. Application: Easily dispensed with application gun and mixing nozzle ideal for that larger area assembly work. |
|
D312 Description: Application Gun Basic Usage: For use with Epoxy Cartridge and Mixing Nozzle, enable product to be applied as mixture. Application: Dispenses from cartridge through nozzle. |
|
D313 Description: Replacement Nozzles QTY: 1 packet = 10 nozzles |
|
D314 Description: PLASTIC WELDER QTY: 24ml Syringe A toughened adhesive for use on most plastics, PVC, ABS, Acrylics, polyesters, vinyl esters and urethane. Plastic Welder has good resistance to outdoor weathering and cures in 5 to 10 min. Bonded materials can be handled in 20 to 30 mins. Ensure proper mixing to even colour - (Not suitable for P/E or P/P) |
|
D370 Description: FUSION BOND QTY: 50ml CARTRIDGE A structural acrylic bonder for use on most materials. This versatile product creates a high impact bond on all metals, composites, ceramics, wood and glass. Fusion bond is ideal for bonding dissimilar materials and has a fast cure of 10 min. Applications include boats, fibreglass, automotive spoilers, vehicle roofs, ducting sheet metal applications, sports goods and aerospace. Fusion Bond has high resistance to fuels, lubricants and solvents and has good gap filling properties and high impact strength. Off white colour. |
Supplementary Products
 |
D400 Description: Turbo Superglue Tube QTY: 3g Basic Usage: Will bond most materials in seconds, pottery, steel, brass, leather, plastics, rubber and jewellery. A premium quality superglue. Application: Remove cap and nozzle. Invert cap, puncture tube. Replace nozzle and cap. Apply adhesive to one surface, press firmly together. |
 |
D402 Description: Extra Superglue QTY: 5g Basic Usage: Will bond most materials in seconds, pottery, steel, brass, leather, plastics, rubber and jewellery. A general purpose superglue. Application: Cut end of nozzle, ensure surfaces are clean and dry. Apply adhesive to one surface, press firmly together. Will bond in seconds. |
 |
D403 Description: Extra Superglue QTY: 20g Basic Usage: Will bond most materials in seconds, pottery, steel, brass, leather, plastics, rubber and jewellery. A general purpose superglue. Application: Cut end of nozzle, ensure surfaces are clean and dry. Apply adhesive to one surface, press firmly together. Will bond in seconds. |
 |
D408 Description: Extra Superglue QTY: 50g Basic Usage: Will bond most materials in seconds, pottery, steel, brass, leather, plastics, rubber and jewellery. A general purpose superglue. Application: Cut end of nozzle, ensure surfaces are clean and dry. Apply adhesive to one surface, press firmly together. Will bond in seconds. |
 |
D404 Description: Cyanoacrylate Activator QTY: 200ml Basic Usage: A specially formulated activator to reduce cure time of cyanoacrylate adhesives. Also for use on inactive surfaces. Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN |
 |
D405 Description: Anaerobic Activator QTY: 200ml Basic Usage: A specially formulated activator to reduce cure time of anaerobic adhesives. Also for use on inactive surfaces. Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN |
 |
D406 Description: Surface Preparation Cleaner QTY: 400ml Basic Usage: Use cleaner to prepare surfaces before application of all Delta adhesives and sealants. Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN |
 |
D407 Description: Polypropylene Activator QTY: 50ml (Pump Spray) Basic Usage: Use to activate surfaces on polypropylene substrates. Which are difficult to bond. Application: Apply to surfaces being bonded. Allow to evaporate then apply adhesives to one surface. |
 |
D409 Description: Contact Adhesive QTY: 500ml Basic Usage: Rubber based adhesive, bonds, laminates, wood, plastics, leather, cork, rubber, stone, metals, fabrics. Application: INSTRUCTIONS ON CONTAINER |
 |
D411 Description: Spray Adhesives QTY: 500ml Basic Usage: As Contact Adhesives in spray form. Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN |
 |
D500 Description: "O" Ring Splicing Kit, Metric and Imperial Sizes QTY: 1 kit Basic Usage: Enables on site making up of "O" rings, covering sizes of 1.6mm - 8.4mm 1/16 inch to 1/4 inch nitrile cord. Application: Select size of cord required, insert in "V" block, cut to length. Apply cyanoacrylate to one surface, press firmly together, will bond in seconds. |
 |
D501 Description: Copper Anti-Seize Compound QTY: 5g Basic Usage: Protects metal parts against rust, corrosion, heat, salt water, alkalis and acids. Prevents seizure of threaded parts, forms protective coating that will not wash off. Prevents disc brake squeal. Do not apply to friction material Application: Ensure surfaces are clean for ease of application. Apply to threaded parts, gaskets, spark plugs etc. and high temperature applications. Ideal for brush application. |
 |
D502 Description: Copper Anti-Seize Compound QTY: 500g Basic Usage: Protects metal parts against rust, corrosion, heat, salt water, alkalis and acids. Prevents seizure of threaded parts, forms protective coating that will not wash off. Prevents disc brake squeal. Do not apply to friction material Application: Ensure surfaces are clean for ease of application. Apply to threaded parts, gaskets, spark plugs etc. and high temperature applications. Ideal for brush application. |
 |
D504 Description: Copper Anti-Seize Spray QTY: 400ml Basic Usage: As 501, 502, 503, in aerosol spray form Application: AEROSOL APPLICATOR READ INSTRUCTIONS ON CAN |
 |
D506 Description: Air Brake - Pipe Sealant ( Anaerobic) Concertina QTY: 75ml Basic Usage: To seal metal threaded parts on air brakes and pipe connections. New design concertina Applicator. Application: Apply to one surface, ensure joint is filled completely with sealant. Assemble and allow to cure. |
 |
D510 Description: MULTI GASKET (ANAEROBIC) CONCERTINA QTY: 75ml High performance multigasket in a unique concertina complete with shroud for easy dispensing. Multigasket has good solvent resistance and applications include engine casings, gearboxes, differentials and flanges. Orange colour. |
 |
D512 Description: MITRE BONDER QTY: 50gm//200ml KIT Mitre Bonder kit is a fast acting two part adhesive that has replaced traditional fixings and provides a strong clean bond in seconds on many materials. Ideal for the manufacture of furniture, typical applications include bedrooms, kitchens, shop installations, cornice, MDF profiles, picture framing and general woodworking. Mitre Bonder is suitable for bonding MDF, wood, rubber, PVC, metal and some plastics.Simply spray one surface with the activator and allow to evaporate, apply adhesive to other surface, push both surfaces together and place in position then hold for 10 seconds, simple as that. Translucent bond. |
Double Sided Adhesive Tape
 |
DST
99 |
 |
DST 100 Size: 12mm x 10MTR Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration and weather resistance. Uses: Automotive mouldings, decals, emblems and mirror fixings. Max Temp: 80°C |
 |
DST 101 |
 |
DST 102 Size: 25mm x 10MTR Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration and weather resistance. Uses: Automotive mouldings, decals, emblems and mirror fixings. Max Temp: 80°C |
 |
DST 103 Size: 50mm x 10MTR Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration and weather resistance. Uses: Automotive mouldings, decals, emblems and mirror fixings. Max Temp: 80°C |
Gaffer Tape - Rubber Adhesive
 |
DT 200 Size: 50mm x 50MTR Colour: Silver Cloth backed tape with polythene film. Good Tear and Moisture Resistance. Max Temp: 60°C |
 |
DT 201 Size: 50mm x 50MTR Colour: Black Cloth backed tape with polythene film. Good Tear and Moisture Resistance. Max Temp: 60°C |
 |
DT 202 Size: 50mm x 50MTR Colour: White Cloth backed tape with polythene film. Good Tear and Moisture Resistance. Max Temp: 60°C |
 |
DT 203 Size: 50mm x 50MTR Colour: Red Cloth backed tape with polythene film. Good Tear and Moisture Resistance. Max Temp: 60°C |
 |
DT 204 Size: 50mm x 50MTR Colour: Green Cloth backed tape with polythene film. Good Tear and Moisture Resistance. Max Temp: 60°C |
 |
DT 205 Size: 50mm x 50MTR Colour: Blue Cloth backed tape with polythene film. Good Tear and Moisture Resistance. Max Temp: 60°C |
 |
DT 206 Size: 50mm x 50MTR Colour: Yellow Cloth backed tape with polythene film. Good Tear and Moisture Resistance. Max Temp: 60°C |
 |
DT 210 ALUMINIUM FOIL TAPE Size: 50mm x 25MTR x 50 Micron A A high quality, durable self-adhesive high tack tape with good peel and excellent tensile strength. This tape can be used on a wide range of materials for industry. Applications include metal, aluminium, plastics, fibreglass,and wood. It can also be used on ducting, insulation and lagging and will operate as a heat shield to 160°C. Service temperature: 30°C - 160°C |
Position & Mounting Tape
 |
DST
301 |
 |
DST 302 STINGER TAPE 25MM X 25MTR ROLL Uses: This versatile high tack, high temperature, permanent tape is an excellent all round performance product. Stinger Tape can be used on a multitude of materials such as glass, powder coating processes, mirror backing, metals, aluminium, carbon fibre, plastics and even the wife's lips! Replacing traditional fixing methods, it's easier to apply and gives uniform bonding with even stress distribution. Temp Range: 200°C |
 |
DST 303 HIGH TACK RESIN BONDING STRIP 25MM X 5MTR X 2MM Uses: Resin tape is a high strength, very high tack bonding strip. With it's unique non hardening toffee-like appearance it remains flexible. It can be used on many applications such as vehicle and boat building, cures squeaking dashboards, repairs to caravans, manufacturing, shopfittings and carpet fixing. Resin Tape is suitable for use on wood, plastics, metals aluminium and carbon fibre and forms a solvent free waterproof bond. Service Temperature: 0°C - 40°C |
 |
DST 400 Size: 39mm x 26mm (Pack of 40) High density P.E. foam - Black 100 grm/m³ Green Liner. Uses: Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet Light, Moisture Stable, High Tack, Good Vibration Resistance. Max Temp: 60°C |
 |
DST 401 Size: 80mm x 25mm (Pack of 60) High density P.E. foam - White. Uses: Very high shear, moisture stable, good resistance to ultra violet light, solvents, oil, grease. High tack. Max Temp: 95°C |
APPLYING DELTA PRODUCTS SUCCESSFULLY - Surface preparation - best results will be obtained by cleaning with D406 surface preparation cleaner. Note: Some surfaces may be affected by solvents (ie plastics). Test small area before use. A slightly roughened surface will ensure good bonding.
CHOOSING AN ADHESIVE - Select adhesive to suit application, - does it need to be permanent or dismantled, what materials are being bonded, is there a gap filling requirement? If in doubt call our technical helpline.
HEALTH & SAFETY - Care should be taken when handling adhesives, ensure adequate ventilation, wear gloves and eye protection. Cyanoacrylate adhesives will bond skin in seconds.
KEEP OUT OF REACH OF CHILDREN. STORAGE: Store containers in a cool dark place.
 |
|
|